معدل ضخ المضخة اللولبية: 10 ~ 1080 متر مكعب/ساعة ، معدل ضخ المضخة اللولبية في الصين: الشركات المصنعة 10 ~ 1080 متر مكعب/ساعة ، الموردين ، مصنع شنغهاي يوانهواي تكنولوجيا ذكية ، المحدودة.

وصف المنتج

نظرة عامة

Dry screw vacuum pump is an air extraction device that uses a pair of screws to perform synchronous high-speed reverse rotation in the pump casing to produce air suction and exhaust. The two screws are finely dynamically balanced and supported by bearings. They are installed on the pump. In the shell, there is a certain gap between screws. Therefore, when the pump is working, there is no friction between each other, smooth operation, low noise, and no lubricating oil is required in the working chamber. And the dry screw pump can pump out a large amount of steam and a small amount of dust, the ultimate vacuum degree is higher, the power consumption is lower, and it has the advantages of energy saving and maintenance-free.

المميزات

● No friction between rotating parts, resulting in low noise.
● Simple structure, making maintenance and servicing convenient.
● Can be combined with Roots pumps and molecular pumps to form an oil-free unit.
● Wider application range: suitable for use in corrosive environments.
● No medium inside the working chamber, ensuring a clean vacuum.
● High vacuum level, with an ultimate vacuum level reaching below 1 Pa.
● Gas is not compressed inside the pump, making it suitable for extracting condensable gases.
● The pump features a sealed structure, with no oil consumption or water leakage during operation.
● Capable of extracting gas in environments with large amounts of water vapor and small amounts of dust.
● No gaps between rotating parts, allowing for high-speed operation and a compact overall size.
● The screw material is made of high-strength special material, which is dense, wear-resistant, and stable in performance.
● Pumped gases are discharged directly from the pump body, without polluting water, posing no environmental burden, and making gas recovery easier.

تطبيقات نموذجية

The typical applications of screw vacuum pumps include oil and gas recovery, vacuum coating, biopharmaceuticals, food processing, monocrystal furnaces, vacuum forming, vacuum smelting, electronics and photovoltaics, and semiconductor synthesis, among others.

دعم المنتجات

معلمة المنتج

الموديل	LG-2	LG-4	LG-12	LG-18	LG-25	LG-50	LG-70	LG-110	LG-150	LG-200	LG-300
معدل الضخ (م³/ساعة)	10	20	50	70	90	180	250	396	540	720	1080
معدل الضخ (لتر/ثانية)	2.78	5.56	13.89	19.44	25	50	69.44	110	150	200	300
Ultimate pressure (50/60Hz)Pa	≤ 5	≤ 5	≤ 5	≤ 10	≤ 10	≤ 5	≤ 5	≤ 5	≤ 5	≤ 5	≤ 5
سرعة الدوران (دورة في الدقيقة)	2730	2840	2850	2850	2870	2900	2900	2900	2900	2900	2900
السلطة (كيلوواط)	0.55	1.1	2.2	3	4	5.5	5.5	7.5	11	15	18.5
قطر مدخل الهواء (مم)	16	25	40	40	50	50	50	65	70	90	100
قطر العادم (مم)	16	25	40	40	50	40	40	40	55	65	65
Cooling water volume (L/Min)	تبريد الهواء القسري					2.5	2.5	2.6	2.8	3	4
الضوضاء (ديسيبل)	70	72	75	75	80	75	72	73	78	78	80
Gear chamber oil volum (L)	/					0.85	0.85	0.85	1.4	2	2
الوزن (كلغ)	50	73	115	144	170	295	350	350	480	520	680
Room temperature (℃)	5 ~ 40
الحد الأقصى للرطوبة المسموح بها	90%
مزود الطاقة	380 فولت 50 هرتز 3 وعاء

جميع الاقسام

مضخة فراغ المسمار

Screw pump Pumping rate: 10~1080 m³/h

وصف المنتج

تطبيقات نموذجية

تواصل معنا